My 1/8th scal Nitro/Methanol buggy :-Oc==3

[RICE RACING]

Got the engine combo done, redid carbon clutch and put on new 14T bell and new center diff.
Clean all transmissions front and rear and chassis, radio tray steering etc, she is ready to go, went and bough some new proline BADLANDS and high down force rear wing too :) :D Tomorrow will paint new and fit new proline body in customary RED
Took photo of some of my spares and general tools needed to make RC much more tollerable and fun :) Its not a cheap game LOL

http://img341.imageshack.us/img341/1787/ricerc2ao2.jpg
http://img338.imageshack.us/img338/9643/ricerc3qf5.jpg
http://img338.imageshack.us/img338/9034/ricerc4ud9.jpg
http://img217.imageshack.us/img217/4752/ricerc5kd1.jpg
http://img217.imageshack.us/img217/7705/ricerc6db2.jpg
http://img217.imageshack.us/img217/8213/ricerc7re4.jpg

Here is a vid of what lower spec buggies do at all four wheels to give you an idea of how sick these cunts are!

http://youtube.com/watch?v=LPA4sf6gEds&feature=related

http://www.youtube.com/watch?v=5b4dOgpAz2Q

Near 3bhp at wheels (all four!!!) believe it or not mines louder than that LOL

Animal :) similar to mine :)

My buggy has a rice racing modified motor (that makes 3.7bhp compared to stock 3.0bhp) ported sleeve and crank, revs to a useable 43000rpm. very durable too for its power to size, will do 15 hours or so before overhaul. Use my own spec 30% nitro fuel... carbon clutch! Torsen diffs!, multiple sets of shockies and springs, sway bars, tires etc ......... Lots of fun

Forgot to add some vital stats:
Car weight *measured* 3370 grams (ready to run)
Power *on engine dyno* 3.5~3.7bhp @ 24000rpm to 27500rpm (on 20% nitro)
3.5cc OR 0.21 cubic inches!!! 2 stroke!!!
Top speed (gearing dependant) set to 75kph
Acceleration = fucking stupid (fastest off road of any type/scale)
Jumps 3m to 5m height with ease
Carbon brake disks for front and back

[FD3S]

rofl, dyno :D

[RICE RACING]

Here is a vid of me swinging some donuts n shit :D

http://media.putfile.com/Magnum-Force

From 2 years ago, still got the same donk but with a bit more porting

[Jims6]

Damm thats crazy shit!!!

Going to hook up the VBOX for some analysis??? :D

Needs a ohlins sticker on it now too!

[RICE RACING]

http://cgi.ebay.com/NEW-AXE-ROSSI-21-COBRA-X1-EVO-HOT-MOD-214R21-ENGINE_W0QQitemZ330229721981QQihZ014QQcategoryZ340 61QQcmdZViewItemQQ_trksidZp1742.m153.l1262

^ Once my current donk lets go I will go with the new generation AXE Rossi donk (above) almost 3.9bhp now! these things rock! These powers listed are on factory 20% nitro, I tend to run 30% so figures will easy crack 4.0bhp :D

[RICE RACING]

Well I fired the cunt up today :D AND I AM DEAF!!!
Swung a few donuts in the workshop (left some nice skids) will go take a few pics for you cunts

[RICE RACING]

Chassis done, will paint new body some other time and post up final pics

http://img255.imageshack.us/img255/3944/rcrice1mm2.jpg
4WD Donuts in workshop!
http://img211.imageshack.us/img211/8951/rcrice3ht2.jpg
http://img91.imageshack.us/img91/7717/rcrice2av7.jpg

[RXHEAVEN]

I had one of these about 5 years ago..
i had to superglue all four tyres onto the rims as in the wet doing four wheel donuts the tyres used to stand up like a drag car's tyres and slide sideways off the rims and take off 200m down the road... i would have to walk ages to go get them...so much power

[RICE RACING]

Machined up a billet low restriction direct air filter assembly for the little terror..... had to richen it up a full half turn :shock: I simply freaken flies now :shock:

http://img227.imageshack.us/img227/5077/getonit1vm9.jpg

http://img252.imageshack.us/img252/2933/getonit2ae7.jpg

http://img227.imageshack.us/img227/3009/getonit3qp2.jpg

http://img227.imageshack.us/img227/7148/getonit4iy0.jpg

http://img412.imageshack.us/img412/4098/getonit5rp3.jpg

[RICE RACING]

Engine check today after retune, did about 1 hours running, runs 120degC set rich/safe for extended high rpm running :D... she looks mint inside.

Have a look at true scale of donk to a human finger! its amazing to think that it makes 1bhp!!! let alone 3.5bhp+ and is so reliable to boot :) This is the original sleeve/barrel its done over 25hours of full noise work at very high rpm (30000rpm average)

http://img382.imageshack.us/img382/3774/enginecheck1al4.jpg

http://img58.imageshack.us/img58/73/enginecheck2eq0.jpg

http://img58.imageshack.us/my.php?image=enginecheck3cv4.jpg

http://img292.imageshack.us/img292/2720/enginecheck4ay8.jpg

http://img292.imageshack.us/img292/317/enginecheck5iu7.jpg

http://img387.imageshack.us/img387/3061/enginecheck6in1.jpg

http://img266.imageshack.us/img266/2319/mega1uc0.jpg

http://img266.imageshack.us/img266/7139/mega2ku3.jpg

[RX758]

http://www.red5.co.uk/VTS-Camera-Car-VGA-Resolution-pr-536.html

you need one of those :P